Error Indication; Low Battery Indicator - Kalorik USK EBS 33087 Manual De Instrucciones

Fax +32 2 359 95 50
To do so,
1) Check that your balance is on a hard and even surface and that
the 4 feet touch the ground.
2) When the scale is turned off, gently push with your foot on the right
or left superior corner.
3) The scale will turn on correctly and the LCD display will show "0.0".
4) Step on the scale (turned on) and remain as still as possible.
5) The stabilized weight is displayed (flashes three times).
6) Step off the scale.
7) The scale turns off automatically.

ERROR INDICATION

If the display shows symbols randomly or if the scale doesn't turn off
automatically, it means that your scale has a problem (wrong
initialization or weighing error).
Step off the scale and wait for it to turn off.
You can start again.
If the problem goes on, remove the batteries for 10 seconds, then
put them back in place.
OVERLOADING INDICATOR
If the symbol appears on the LCD screen, it means that the
maximum weight accepted by your scale is exceeded, please step
off in order not to damage your scale.

LOW BATTERY INDICATOR

If the symbol is displayed on the LCD screen, it means that
the batteries of your scale should be replaced (see paragraph
"Before the first use").
Copies of the I/B. Please reproduce them without any
changes except under
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
4
Back cover page (last page)
Assembly page 4/16
special instruction from Team
Print only
USK EBS 33087 - 110127