Cleaning The Blades - HAIRCUT TH37 Manual De Utilización

4. Servicing
4.1. Routine servicing
 After 30 minutes of use, it is advisable to lubricate the blades. Use the
lubricating oil supplied with the clippers (Fig. 1-L).
 Lubricate the blades at least once a day (Fig. 4).
 After using the clippers each time, clean the blades with the brush supplied
(Fig. 1-M).
 If necessary, clean the body of the clippers with a cloth slightly moistened with
water or mild liquid soap. Never use abrasive products or solvents.
 Clean the blades with an antibacterial spray. We recommend the STERIL
CLEANER 920- cleaning, lubricating and cooling product.

4.2. Cleaning the blades

In the case of intensive use, clean the blades at least once a day.
 Remove the blades as described in § 3.4.
 Clean the inside of the blades with the brush supplied (Fig. 1-M).
 Lubricate the cutters (Fig. 4) and put the blades back on the clippers as
described
PROFESSIONAL CORD CLIPPERS
in
20
EN
§ 3.4.