Specifications - Sony WD-850 Manual De Instrucciones

Specifications

Frequency range
US model: 470 to 806 MHz
European and Australian models: 470 to
862 MHz
Antenna input/output impedance
50 ohms
Antenna input/output connectors
BNC-R (BNC-BJ) type
Antenna input connectors
2 inputs 2 channels
Cascade output connectors
1 output 2 channels
Output connectors
4 output 2 channels
RF transmission loss
±3 dB (between antenna input to output)
Inter-connector connection loss
15 dB or more
Input/output VSWR
3.0 or less
Power requirements
US model: AC 120 V 60 Hz
European and Australian models: AC 230
V 50 Hz
Power consumption
18 W (when 100 mA is being supplied to
the antenna booster)
Power supply for antenna booster
DC 9V/OFF switchable (supplied
through the antenna input connectors)
Operating temperature
0°C to +50°C (+32°F to +122°F)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
12
Specifications
Dimensions
Front view
Rack mounting
bracket
Side view
Rack mounting bracket
Mass Approx. 4.4 kg (9 lb 11 oz)
Accessories supplied
50-ohm terminator (6)
AC power cord (1)
Operating Instructions (1)
Design and specifications are subject to change without
notice.
Note
Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT LIMITED
TO, COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF
THIS UNIT, EITHER DURING THE WARRANTY
PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
Unit: mm (inches)
WD-850 Rack mounting
bracket