Specifications - Sony AN-820A Manual De Instrucciones

Reference: signal loss examples
Type of cable
Frequency
Cable 50 m (150 feet)
length
100 m (300 feet)
For more information on connections of this unit, refer to the Operating Instructions
supplied with the connected device (tuner, tuner base unit, antenna divider, or powered
mixer, etc.).

Specifications

Frequency range
758 to 862 MHz (AN-820A)
638 to 758 MHz (AN-820A/M)
566 to 662 MHz (AN-820A/L)
Built-in amplifier gain
10 dB ±2 dB (when 9 V DC is
supplied)
18 dB ±2 dB (when 12 V DC is
supplied)
Output impedance
50 ohms
Voltage standing-wave ratio
Less than 3
Noise figure
Less than 4 dB
Third intermodulation
More than 60 dB (at 85 dBµV
input)
Output connector
BNC-R type
Supply voltage
9 V/12 V DC
Current consumption
Less than 50 mA
Operating temperature
0°C to 50°C (32°F to 122°F)
Storage temperature
8 Specifications
RG-212/U
600 MHz 800 MHz
12 dB 14 dB
24 dB 28 dB
Dimensions
Mass About 250 g (9 oz)
Accessories supplied
Design and specifications are subject to
change without notice.
EMF
RG-213/U
600 MHz 800 MHz
9 dB 11 dB
18 dB 22 dB
–20°C to +60°C (–4°F to +140°F)
70 × 117 × 132 mm (w/h/d) (2
5 1
4 / × 5 / inches)
8 4
Attachment A (1)
Attachment B (1)
Microphone stand screw (1)
Microphone stand screw adaptor
1 5
(PF / to NS / ) (1)
2 8
Fixing screws (1 set)
7
/ ×
8