Attach The Vertical Rails; Attach The Bracket Assembly - StarTech RK12WALLOA Guia Del Usuario

Attach the vertical rails

1. Place one of the vertical rails inside one of the bracket assemblies and line up the
assembly holes.
2. At the front and side of the front horizontal bracket, use a Phillips type screwdriver
to insert four of the assembly screws through the front horizontal bracket and into
the vertical rail.
3. Repeat steps 1 and 2 to attach the other vertical rail to the bracket assemblies.

Attach the bracket assembly

1. Turn the other bracket assembly over and place the front horizontal bracket over
the vertical rails.
2. At the front and side of the front horizontal bracket, use a Phillips type screwdriver
to insert two of the assembly screws through the front horizontal bracket and into
the vertical rail.
3. Repeat step 2 to attach the bracket assembly to the other vertical rail.
Instruction manual
6