Turning The Appliance On; Fan Mode - Haverland TAC-0918 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TURNING THE APPLIANCE ON

Plug into the mains socket.
Two lines appear on !he display indicating that the appliance is in stand by.
Press the ON/STAND-BY button ( A). When turned on, the air conditioner
starts operating in the same mode as when it was turned off.
Press the MODE button (B) until the light corresponding to the required
mode lights up.
Light(F)
$ : cool mode
* :
Light ( G )
• : dehumidifying mode
Light ( H )

fan mode

Light ( N )
- : � :- : heat mode ( Heati ng model only)
COOLMODE
Ideal for hot muggy weather when you need to cool and dehumidify the room.
To set operation of the appliance correctly, press the ..6.(D) orT(E) buttons
until the desired temperature is displayed.
Then select the fan speed by pressing the
corresponding to the required fan speed lights up:
HIGH :
the cool operates at maximum to reach the required
temperature as rapidly as possible
MEO:
reduces noise levels but still maintains a good leve! of comfort
LOW:
for silent operation
AUTO:
the appliance automatically selects the most suitable fan speed
in relation to the temperature set on the digital display.
The most suitable temperature for the room during the summer varies from
24 to 27
º
C .You are recommended, however, not to set a temperature
much below the outdoor temperature.
DEHUMIDIFYING MODE
Ideal for reducing humidity in spring and autumn, during rainy spells or in
damp rooms, etc.
In dehumidifying mode, the appliance must have the same configuration
as for the air conditioning mode, with the air exhaust hose fitted to the
appliance to allow air to be discharged externally.
When the dehumidifying mode is selected, the light (G) comes on and
"d h
" appears on the display.
At the same time, the AUTO fan light (J) comes on. In this mode, other
speeds cannot be selected.
FAN MODE
Adjust tan speed by pressing the
cool mode.
AUTO
In this mode,
cannot be selected.
The tan speed selected will be displayed.
Operation
00
button (C) until the light
00
button (C) as described for the
59
B
ºC/ ºF

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Tac-1218

Tabla de contenido