QuicK guide
sWiTching On/ OFF
sWiTching On
on
Undo the lOCKiNg sliDe (10) and
10
turn the sWiTCH-ON leVeR (1)
off
counter-clockwise. The sWiTCH-ON
1
leVeR is now secured from being
switched off unintentional. Right now
battery
the appliance number is indicated,
the self-test starts and the remaining
battery capacity is shown in %.
sWiTching OFF
10
Undo the lOCKiNg sliDe (10) and
turn the sWiTCH-ON leVeR (1) clock-
1
wise.
selF-TesT and
TRansmissiOn mOde
The self-test is visible on the display.
The remaining battery capacity (6) is
6
shown: 99 (%).
after a successful self-test the
ORTOVOX 3+ starts transmitting and
the transmission elements flash on
the display. The battery symbol shows
the remaining battery capacity.
if a fault is detected during self-test,
a warning appears on the display:
e1, e2, e3 or e4.
27
GB