Eliminate Fault; Cleaning And Maintenance - Orbegozo TES 3650 Manual De Instrucciones

TES 3650

ELIMINATE FAULT

PROBLEM CAUSES AND SOLUTIONS
No power. Replace all the worn batteries with 4 new ones.
Check the battery installation for proper placement of the batteries
No display appears on the display screen.
polarities.
Blood pressure varies constantly. Many factors including stress, time
Measurement values appear too high or of day, how you wrap the cuff, may affect your blood pressure.
too low. Review the sections "Proper Use of the Arm Cuff" and "Take a
Measurement".

CLEANING AND MAINTENANCE

− Do not disassemble the unit
− Do not fold the cuff or immerse it in water
− Do not use volatile liquids to clean the main unit
− Do not use petrol, thinners or similar solvents to clean the cuff
− Do not subject the unit to strong shocks or vibrations
− Do not subject the main unit and the cuff to extreme temperatures, humidity, moisture or direct sunlight.
− Do not carry out repairs of any kind yourself. If a defect occurs, please contact your distributor.
à If needed, please use ultraviolet radiation of disinfection.
− The unit should be cleaned with a soft, dry cloth.
− Use a soft, moistened cloth and soap to clean the arm cuff
− Substitution of a cuff different from that supplied might result in measurement error.
The accuracy of this blood pressure monitor has been carefully tested and is designed for a long service life.
We recommend that the performance be checked every 2 years and after maintenance and repair, by
utilizing the monometer mode and verifying the accuracy of the manometer at least at 50 mmHg and 200
mmHg.
30