Publicidad
Introduction
The RK619WALLV provides a convenient, space-saving storage
system that you can use to wall-mount a server or other equipment.
The RK619WALLV can be mounted vertically against a wall, or it can
be mounted horizontally under a desk.
Package contents
• 1 x vertical wall-mount bracket
• 16 x M5 cage nuts
• 16 x M5 screws with washers
• 6 x wood screws
• 1 x instruction manual
Product diagram
Mounting hole
Note: There are two additional mounting holes on the left side of the
bracket that aren't visible in the drawing.
Use of Trademarks, Registered Trademarks, and other Protected Names
and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected
names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of their
respective holders.
Technical Support
StarTech.com's lifetime technical support is an integral part of our commitment to provide
industry-leading solutions. If you ever need help with your product, visit www.startech.com/
support and access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Mounting holes
*actual product may vary from photos
Mounting holes
Mounting holes
Installation
The weight capacity of the RK619WALLV is 90 kg (200 lb.).
1. Hold the bracket against the wall in the desired installation
position and mark the six mounting points on the wall where you
want to mount the bracket.
2. Hold the bracket against the wall and do one of the following:
• Insert the six wood screws through the six Mounting holes
and into the wall.
• Select the appropriate installation hardware for the type of
surface you're using and insert the hardware through the six
Mounting holes and into the wall.
3. Use the provided cage nuts and screws to install your rack-
mountable equipment into the bracket.
Warranty Information
This product is backed by a lifetime warranty.
StarTech.com warrants its products against defects in materials and workmanship for the periods
noted, following the initial date of purchase. During this period, the products may be returned for
repair, or replacement with equivalent products at our discretion. The warranty covers parts and
labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers,
directors, employees or agents) for any damages (whether direct or indirect, special, punitive,
incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss,
arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If
such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Publicidad
