Publicidad
Introduction
The RK8OD provides a cost-effective mounting option where space
might be limited. This 8U rack features a lightweight two-post design
that is suitable for installation on or around your desk, providing
easy access to the mounted equipment in your workspace.
Package contents
• 1 x left base bracket
• 1 x right base bracket
• 1 x left vertical rail
• 1 x right vertical rail
• 1 x front base bracket
• 4 x rubber feet
• 8 x assembly screws
• 20 x M5 screws
• 20 x M5 cage nuts
• 1 x instruction manual
Assembly
Warning! Make sure that the weight of
exceed the weight capacity of this product. If you exceed the weight
capacity, you might experience personal injury or damage to the
equipment. This product can support the following weight: Up to
45.3 kg (100 lb.).
1. Remove the pins from the inside of the four Rubber feet.
2. Push the Rubber feet into the holes on the underside of the Left
base bracket and Right base bracket, and insert the pins back
into the Rubber feet.
3. Align the assembly holes on the side of the Left base bracket with
the assembly holes on the side of the Left vertical rail.
4. Insert two of the Assembly screws through the Left base bracket
and into the Left vertical rail, and tighten the screws in place.
5. Repeat steps 2 and 3 with the Right base bracket and the Right
vertical rail.
6. Align the assembly holes on each end of the Front base bracket
with the assembly holes on the front of the Left base bracket and
the Right base bracket.
7. Insert the Assembly screws through the Front base bracket and
into the Left base bracket and the Right base bracket. Tighten
the screws in place.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com's lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and
access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a lifetime warranty.
StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for
repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not
allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
the equipment doesn't
8. Arrange your equipment in the rack so that the heaviest item is
on the bottom of the rack and the other items are arranged in
descending order of weight, with the lightest item installed at the
top of the rack.
9. Use the provided M5 screws and M5 cage nuts to mount the
equipment into the rack.
Caution! Don't move the rack after you mount equipment into it.
Instead, remove the equipment, relocate the empty rack, and then
load the equipment back into the rack.
Left vertical rail
Front base bracket
Assembly screws
Left base bracket
Assembly screws
Publicidad
