Amica PB2VQ203DFT Serie Manual De Instrucciones página 41

OPERATION
You can now adjust the heating power at any time following the instructions provided in the
section: „Setting the heating power".
If you do not start setting the heating power within 10 seconds, the point will stop
flashing by „9", and the automatic power reduction system will stay inactive.
If you do not wish to use the automatic power reduction system, start setting
the heating power from „+" sensor.
Switching off the whole ceramic hob
The hob is on when at least one hotplate
has been switched on. You can switch off the
whole hob by touching the main sensor. The
hotplate indicator displays letter "H", indicat-
ing the residual temperature.
Switching one hotplate off
You can switch off one of the hotplates in the following way:
- touch sensors „+" and „-" at the same time or
- reduce the set point to „0" using sensor „-"
Letter "H" is displayed indicating the residual temperature.
41