Manual Mode - T3 LUCEA ID Manual Del Usuario

OPERATING
16
INSTRUCTIONS

MANUAL MODE

You can manually select or adjust your heat
settings using the Manual Mode.
SWITCH TO MANUAL MODE
If first time use:
Tap the Power Button once after turning on
the tool. You will hear a beep. The HeatID
icons will go away and the Temperature
Panel will appear.
If second time use:
The styling iron will immediately begin
heating up to your last used heat setting. To
manually adjust the heat:
1
First unlock the styling iron by quickly
double tapping the Power Button.
You will hear an unlock sound.
2
Tap the Power Button one more time
to switch from HeatID to Manual
Mode. You will hear a beep. The
HeatID icons will go away and the
Temperature Panel will appear.
LUCEA ID
OPERATING
INSTRUCTIONS
LUCEA ID
1
SELECT HEAT SETTING
To increase heat: Tap the top of
the Temperature Panel
To decrease the heat: Tap the
bottom of the Temperature Panel
2
LOCK YOUR HEAT SETTING
Double tap the Power Button to
lock the screen and Lucea ID will
begin to heat up.
Note: Iron will auto lock after 10
seconds of inactivity.
3
READY TO USE
Once the styling iron beeps
and the lights turn solid, the
iron has reached your heat
selection and is ready to use.
17