Descargar Imprimir esta página

Sears CRAFTSMAN 917.388111 Manual Del Propietário página 8

Publicidad

Idiomas disponibles

Idiomas disponibles

®
The operation
of any lawn
SAFETY
GLASSESmower can result in foreign
objects
thrown into the
eyes, which can result in
severe eye damage.
Always
wear safety glasses
or eye shields while
operating
your lawn mower or performing
any adjustments
or repairs. We recom-
mend a standard
safety glasses
or wide
vision safety mask worn over spectacles.
HOW
TO USE YOUR
LAWN
MOWER
ENGINE
SPEED
Engine speed was set at the factory for
optimum
performance.
It is not adjustable.
ENGINE
ZONE
CONTROL
_CAUTION:
Federal
regulations
require
an engine control to be installed
on this
lawn mower
in order to minimize
the
risk of blade contact
injury. Do not under
any circumstances
attempt to defeat the
function
of the operator
control.
The blade
turns when the engine is running.
• Your lawn mower is equipped
with an
operator
presence
control bar which
requires
the operator
to be positioned
behind the lawn mower handle to start
and operate
the lawn mower.
TO ADJUST
CUTTING
HEIGHT
Raise wheels for low cut and lower wheels
for high cut, adjust cutting height to suit
your requirements.
Medium
position
is
best for most lawns.
To change
cutting
height, squeeze
ad-
juster
lever toward
wheel.
Move wheel
up or down to suit your requirements.
Be
sure all wheels
are in the same setting.
NOTE: Adjuster
is properly
positioned
when
plate tab inserts
into hole in lever. Also, 9-
position adjusters
(if so equipped)
allow lever
to be positioned
between
the plate tabs.
LEVER
BACKWARD
Plate tab
TO LOWER MOWER
LEVER
FORWARD
TO RAISE MOWER
Lever
TO CONVERT
MOWER
Your lawn mower was shipped
ready to be
used as a mulcher.
To convert
to bagging
or discharging:
REAR BAGGING
• Lift rear door of the lawn mower and
place the grass catcher frame
hooks
onto the door pivot pins.
To convert
to mulching
or discharging
operation,
remove
grass catcher
and
close rear door.
Pivot pins
Rear
G rass
catcher
handle
Catcher frame hook
SIDE DISCHARGING
• Rear door must be closed.
• Open mulcher
door and install dis-
charge
deflector
under door as shown.
• Mower
is now ready for discharging
operation.
• To convert to mulching
or bagging
opera-
tion, discharge
deflector must be removed
and mulcher
door must be closed.
SIMPLE
STEPS
TO REMEMBER
WHEN
CONVERTING
YOUR
LAWN MOWER
FOR MULCHING
-
1. Rear door closed.
2.
Mulcher
door closed.
FOR REAR BAGGING
-
1. Grass catcher
installed.
2.
Mulcher
door closed.
FOR SIDE DISCHARGING
-
1. Rear door closed.
2.
Discharge
deflector
installed.
ACAUTION:
Do not run your lawn mower
without
rear door closed,
clipping
deflector
or approved
grass catcher
in place.
Never
attempt to operate
the lawn mower with the
rear door removed
or propped
open.
\\
Open mulcher door
install
discharge
8 deflector
÷
388111-es-412691_r0indd
8
4_
2/23/2007
10:59:49AM

Publicidad

loading