Lenco PQB-1050 Manual Del Usuario página 9

LED light
•To switch the light on, press and hold the On/Off button for approx. 2 seconds.
•To switch the light off, press and hold the On/Off button for approx. 2 seconds again.
Problems/solutions
The connected device is not charging
•Are the device and the spare battery connected correctly?
•Is the spare battery switched on? If necessary, briefly press the On/Off button once to turn the spare battery on.
•Is the spare battery charged? If none of the indicator lights flash or light up, the spare battery is empty.
•If you are using the spare battery near strong magnetic fields (e.g. from any television devices or speakers), the charging
process may malfunction. Change the location, disconnect the spare battery from the device and then try connecting them again.
The spare battery switches itself off automatically after a short time
•Does the connected device have a power consumption of less than 85 mA and therefore is not recognised? In this case,
connect another device into the second output on the spare battery so that the current strength is above 85 mA.
Model:
Rechargeable battery:
Input:
Output:
Charging time (spare battery):
Ambient temperature:
Technical specifications
PBQ-1050
Lithium-ion, 10,000 mAh (not replaceable)
DC 5V/2A and 5V/2.4A (type C)
DC 5V/2.4A, 9V/1.7A, 12V/1.2A and DC 5V/2.4A (type C)
approx.4h (+/-0.5h)
0 to+45°C
09
EN
NL
DE
FR
ES