This Air Blower is intended for
commercial use.
SAFETY INSTRUCTIONS
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it
–
should malfunction or break down,
grounding provides a path of least re-
sistance for electric current to reduce
the risk of electric shock.
This appliance is equipped with a cord
–
having an equipment grounding con-
ductor and ground plug.
The plug must be inserted into an ap-
–
propriate outlet that is properly installed
and grounded in accordance with all lo-
cal codes and ordinances.
WARNING:
Improper connection of the equipment-
–
grounding conductor can result in a risk
of electric shock.
Check with a qualified electrician or ser-
–
vice person if you are in doubt as to
whether the outlet is properly grounded.
Do not modify the plug provided with
–
the appliance.
If it will not fit the outlet, have a proper
–
outlet installed by a qualified electrician.
This appliance is for use on a nominal
–
120-volt circuit, and has a grounded
plug that looks like the plug illustrated in
Fig.A.
A temporary adapter that looks like the
–
adapter illustrated in Fig.B, may be
used to connect this plug to a two-pole
receptacle as shown in Fig.B, if a prop-
erly grounded outlet is not available.
The temporary adapter should be used
–
only until a properly grounded outlet
(Fig.A) is installed by a qualified electri-
cian.
The green colored rigid ear, lug, or the
–
like extending from the adapter must be
connected to a permanent ground such
as a properly grounded outlet box cover.
Whenever the adapter is used, it must
–
be held in place by a metal screw.
IN ALL CASES, MAKE SURE THE
RECEPTACLE IN QUESTION IS
PROPERLY GROUNDED.
EN
3