Turning On And Off; Program Selection - Fulgor Milano FBC 4005 TC X Manual Del Usuario

GB

3.11 Turning on and off

To turn on the appliance press the ON/OFF
button located to the side of the display for
at least 2 seconds. The logo is displayed for
a few seconds, then the "Main Menu" screen
appears.
In the absence of interaction for 5 minutes,
the appliance turns into power save mode,
displaying the current time.
To turn off the appliance press and hold the
ON/OFF button to the side of the display for
at least 2 seconds. This can be done at any
time. If you switch the appliance off while a
program is running, a message appears on
the display and the program is stopped.
STOP
To suspend the running program.
It is necessary to confirm the cancellation by pressing "yes" on the following screen.
The program will be interrupted and the display will return to the Main Menu.
LIGHTING
To turn on/off the internal lighting: the light will be switched on or off depending on
the bulb colour (either black or white). After prolonged absence of user interaction the
light switches off.

3.12 Program selection

The operating mode is chosen in the "Main
Menu", by tapping the desired icon. Press
and hold an icon to display a "Help" screen,
displaying some brief information about the
program (fig.7).
Fig.7 – Example of "Help" screen
Each program features a power-saving
screen (screensaver) that is automatically
activated if the user does not interact with
the display. The screen shows the current
time or, if a program is running, the program
icon.
To exit the screensaver tap anywhere on
the screen.
12