Index
Important Information ...................................................................................................................English-1
Warning, Caution ..........................................................................................................................English-1
Intended Use ................................................................................................................................English-2
Recommended use ......................................................................................................................English-3
Controls ........................................................................................................................................English-4
OSD (On-Screen-Display) ...........................................................................................................English-6
Specifi cations ...............................................................................................................................English-7
Important Information
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT
USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE
PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO
FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET.
DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Power Cord Important Information
CAUTION: Please use the power cord provided with this monitor in accordance with the table below. If a power cord is not
supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the
AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.
Plug Shape
NOTE:
This product can only be serviced in the country where it was purchased.
Declaration
Means of Conformity
Device Classifi cation:
Applicable Rules:
Product Name:
Model Number:
UMDNS Code:
MD462OR Quick Reference Guide.indb 1
MD462OR Quick Reference Guide.indb 1
Plug Type
European Continental
Country
EU (except U.K.)
Voltage
Declaration of the Manufacturer
Declaration of the Manufacturer
Class I, non-measuring function
Annex IX, Rules 1.4 (Section 1)
and 1.1 (Section 3)
MD462OR
46" Operating Room Solution
MD462OR
16-603
WARNING
CAUTION
230
NEC Display Solutions Europe GmbH declares that the product
listed is in conformity with the essential requirements and
provisions of the Council Directive 93/42/EEC, including the
amendments of the Council Directive 2007/47/EC, and conforms
to the applicable clauses of the following standards:
- EN 60601-1
- EN 60601-1-2
- EN 61000-3-2
- EN 61000-3-3
NEC Display Solutions Europe GmbH
Landshuter Allee 12-14. 80637 Muenchen, Germany
English-1
U.K.
U.K.
230
6/24/14 11:36:21 AM
6/24/14 11:36:21 AM