Intended Use - NEC MD462 OR Guía De Referencia Rápida

Intended Use

The MD462OR Operating Room Solution is intended to be used for review of medical images by trained physicians.
MD462OR cannot be used for a life-support system.
Safety Precaution
The unit is designed for exclusive interconnection with IEC60950 certifi ed equipment outside of patient environment and IEC
60601-1 certifi ed equipment inside the patient environment.
• Equipment connected to digital interfaces must comply with the respective IEC standards (e.g. IEC 60950 for data
processing equipment and IEC 60601-1 for medical equipment).
• This device complies with EN60601-1-2. To minimize the interference from other equipment, a minimum 0.5 m distance shall
be kept form other potential electromagnetic sources, such as a Cell Phone.
• To reduce the risk of electric shock, make sure the power cord is unplugged from the wall socket. To fully disengage
the power to the unit, please disconnect the power cord from the ac outlet. Do not remove the front or back cover. No
user serviceable parts inside. Refer servicing to qualifi ed service personnel. The AC outlet shall be readily available and
accessible.
European Customers
Unpacking, Installation and calibration of this monitor must only be done by authorized and trained personnel. Any installation
done by a non-authorized person is done under his own risk and we accept no responsibility in any device malfunctioning.
NOTE: The MultiSync P463 User's Manual, is an integral part of this product. For all items exceeding the scope of this
Quick Reference Guide, please refer to the MultiSync P463 User's Manual.
MD462OR Quick Reference Guide.indb 2 MD462OR Quick Reference Guide.indb 2
English-2
6/24/14 11:36:21 AM 6/24/14 11:36:21 AM