Purpose Of Use; Work Area Safety - Beta 3006 Manual De Uso E Instrucciones

OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
OPERATION MANUAL AND INSTRUCTIONS FOR HYDRAULIC JACK MANUFACTURED BY:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845, Sovico (MB)
ITALY
Original documentation drawn up in ITALIAN.
CAUTION
Store the safety instructions with care and hand them over to the users.

PURPOSE OF USE

- The hydraulic jack for lifting and positioning HGV wheels can be used for the following purposes:
• Lifting and positioning tractor and excavator wheels
- The reversible air ratchet must not be used for the following operations:
• No corrosive substances may be used
• The hydraulic jack may not be used at any temperatures other than those stated in the TECHNICAL DATA table
• The hydraulic jack may not be used in environments containing potentially explosive atmospheres
• The hydraulic jack may not be used for any applications other than the established applications

WORK AREA SAFETY

- Use the hydraulic jack on an even floor. Using the hydraulic jack on uneven, loose floors may result in unsteadiness or loss
of the load.
Do not operate the hydraulic jack in environments containing potentially explosive atmospheres, because sparks may
be generated, which can ignite the dust or fumes.
Contact with live equipment should be avoided, because electric shocks may be caused.
Keep children and bystanders away from your workplace while operating the hydraulic jack. Distractions from other
people can cause you to lose control during use.
For safety reasons, the hydraulic jack must be used by one person.
HYDRAULIC JACK SAFETYY
- Before use, check that the hydraulic jack has not been damaged, that no oil leaks have occurred and that no parts are worn.
- Do not overload the hydraulic jack. Overloading the hydraulic jack may damage or break it.
- Before use, test the hydraulic jack for proper operation.
PERSONNEL SAFETY
- Stay alert; watch what you are doing. Do not use the hydraulic jack while tired or under the influence of drugs, alcohol, or
medication.
- DURING LIFTING AND/OR LOWERING OPERATIONS, PAY ATTENTION TO THE POSITION OF YOUR HANDS AND
FEET, TO AVOID CRUSHING THEM.
- Always use the following personal protective equipment:
• safety shoes
• protective gloves
- Make sure you are in a safe position, keeping proper balance at all times. A safe working position and a proper body posture
enable better control of unexpected situations.
HYDRAULIC JACK USE AND CARE
- Do not overload the hydraulic jack. Always check that it is free from defects.
- Always make sure that the load is steady while handling it.
6
IMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING THE
PNEUMATIC TOOL. FAILURE TO COMPLY WITH THE SAFETY STANDARDS AND
OPERATING INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.
EN I