Daewoo DTD 5500 Manual De Instrucciones página 33

PIN code (default as 0000). Input the correct 4-digit pin code and press MENU key to confirm
Press ▲/CID or ▼/OUT key will scroll the handset names. Press MENU key to confirm.
2)
The handset will be deleted from the list on registered handset on the base.
 RING SETUP
The user is able to change the ringing on internal calls and external calls. There are 10 ringer melodies
and 5 different volume levels can be set.
Use ▲/CID or ▼/OUT key to select RING SETUP item. Press MENU key to enter.
1)
Press ▲/CID or ▼/OUT to select the INT RING/ EXT RING setup. Press MENU key to confirm.
2)
Press ▲/CID or ▼/OUT key to select the MELODY and VOLUME setup.
3)
If select MELODY: Press MENU key to confirm. Press ▲/CID or ▼/OUT key to select desired
melody, the corresponding melody sound can be heard. Press MENU key to confirm.
If select VOLUME: Press MENU key to confirm. Press ▲/CID or ▼/OUT key to select desired ringer
volume 1-5, if you want to switch off, select OFF. Press MENU key to confirm your selection.
 To set dial mode (Tone/Pulse)
The user can select to change the mode in which the base will dial.
Use ▲/CID or ▼/OUT key to select DIAL MODE item. Press MENU key to enter.
1)
Press ▲/CID or ▼/OUT key to select the TONE or PULSE dialing mode. Press MENU to
2)
confirm.
Note: According to your telephone lines or PABX systems you may need to change the dialing mode
between Tone and Pulse.
 To set flash time
The user can select the flash time (100ms, 300ms, 600ms and 1000ms) to meet your telephone line or
PABX requirement.
Use ▲/CID or ▼/OUT key to select FLASH TIME. Press MENU key to enter.
1)
Press ▲/CID or ▼/OUT key to select the 100ms, 300ms, 600ms and 1000ms. Press MENU to
2)
confirm.
 To turn on/off key tone
The user is able to change the Base tone settings.
Use ▲/CID or ▼/OUT key to select KEY TONE. Press MENU key to confirm.
1)
Press ▲/CID or ▼/OUT key to select the ON or OFF to enable or disable the beep sound.
2)
3) Press MENU key to confirm your selection.
Noted: If you select ON, a beep sound will be sounded when a key is pressed on the Base in idle mode
except INT and
 LANGUAGE
Use ▲/CID or ▼/OUT key to select LANGUAGE item. Press MENU key to enter.
1)
Press ▲/CID or ▼/OUT key to select your desired language from ESPAÑOL (Spanish),
2)
PORTUGUES (Portuguese), PYCCKNÑ (Russian), TÜRKÇE (Turkish) ENGLISH (English),
DEUTSCH (German), FRANÇAIS (French) and ITALIANO (Italian),. Each language will display
in its own native translation. Press MENU key to confirm your selection.
 To set DATE and TIME
The user is able to set the date and time on the base by selecting the following option.
keys.
33