Getting Started - KREAFUNK bGEM Manual De Instrucciones

GETTING STARTED

Wearing the headphones
a. Choose the suitable ear tip size
for your own convenience.
b. Wear the L (left) and R (right)
earbud accordingly, and adjust
them both to get the best sound
experience.
USING ONE EARBUD
Each earbud can be worn individ-
ually and function as a Bluetooth
headset for hands-free phone calls
e.g. when driving.
1. Power on
Press the power button for about
3 seconds and release it when the
blue LED light starts flashing, and
the earbud prompts "power on".
2. Connecting bGEM to Bluetooth
device
Set the earbud into connecting
mode by pressing and holding
down the power button until
the red and blue light flashes
alternately and the earbud promts
"pairing". Then power on the
smartphone or any other Bluetooth
device you want to connect bGEM
to. Switch on the Bluetooth on your
device and connect to either bGEM
L or bGEM R. After a successful
connection, the earbud prompts
"source connected" and the blue
LED light will flash twice every 5
seconds continuously.
3. Power off
Press the power button for about
6 seconds and release it when
English
9