Basic Operation; To Stop Playback - JVC RC-EX20S Manual De Instrucciones

Basic operation

1 Press CD/RANDOM to enter CD mode, if the unit
is in TUNER or TAPE mode.
2 Press ) PUSH to open the disc door.
3 Load a disc with the label side facing up and close
the disc door.
• 8-cm (3-3/16") CD can be played on the unit without
an adapter.
4 Press PLAY/PAUSE 3/8 to start playback.
The current track number and elapsed playing time
are displayed during playback.
CD
5 Adjust the volume.
Notes:
• The following indication may be displayed when the
disc is loaded upside down. Reload the disc correctly.
CD
• If mistracking occurs during playback, lower the
volume.
• Mistracking may occur if a strong shock is applied to
the unit or if it is used in a place subject to vibrations
(e.g. in a car travelling on a rough road).
• If you press CD/RANDOM while in CD mode, the unit
enters the random playback mode.
9
5 1 3 2
PUSH
DISPLAY

To stop playback

Press STOP 7.
Caution:
Stop playback before opening the disc door. Check that
the disc has completely stopped rotating before
unloading the disc.
To pause playback
Press PLAY/PAUSE 3/8 during playback.
To resume playback, press the button again.
4
STOP