JVC RC-EX20S Manual De Instrucciones página 20

Synchronized recording with CD playback
You can make the CD player to start playback when the tape deck enters the recording mode.
1 Load a cassette.
Use only a type-I normal tape.
2 Load a CD.
3 Press CD/RANDOM to enter CD mode.
4 Specify a track or point on the disc to start
recording.
• To start recording from the desired track, select the
track by pressing 4 or ¢ in stop mode.
• To start recording from the desired point on a disc,
play the disc and pause at the desired point by
pressing PLAY/PAUSE 3/8.
5 Press REC ¶.
PLAY 2 is also depressed, and synchronized
recording starts.
• The CD SYNC indicator appears in the display
window during synchronized recording.
Erasing
When recording on a pre-recorded tape, the previous
recording is erased and only the new recording is heard
next time the tape is played back.
17
3 1 5 2 4
PUSH
DISPLAY
When the tape reaches the end first, the CD player enters
the pause mode. Press PLAY/PAUSE 3/8 to continue
playback, or press STOP 7 to stop playback.
When the CD player stops first, the tape continues
running. In this case, press STOP/EJECT § to stop
the tape.
To erase a tape without making a new
recording
1 Press TAPE on the unit to enter the tape mode.
2 Press REC ¶.