FEATURES
The unit features a detachable front control panel, FM/FM stereo RDS, USB / SD:
•
Electronic Volume, Bass, Treble, Fader and Balance control.
•
Precision electronic tuning with phase-lock loop (P.L.L.) circuitry.
•
Programmable 18 preset memory tuning (6 each for FM1/ FM2 / FM3)
•
Simple Bluetooth function (Answer & Call)
•
Manual / Auto (Seek) / up and down tuning control
•
Band selector for FM1/ FM2 / FM3
•
Display control (Frequency, Station Name, Program Type, Clock)
•
Clock Function in RDS
•
MP3 Repeat Function
•
Preamplified Line-out
•
Detachable front panel protects against theft
•
Lighting system
•
RDS Function: PI (Program Identification)
PS (Program Service Name)
AF (List of Alternative Frequencies)
TP (Traffic Program)
INSTALLATION
PRECAUTIONS
•
Choose the mounting location carefully so that the unit will not interfere with the normal
driving functions of the driver.
•
Avoid installing the unit where it would be subject to high temperatures, such as from
direct sunlight or hot air from the heater, or where it would be subject to dust, dirt or
excessive vibration.
•
Use only the supplied mounting hardware for a safe and secure installation.
•
Be sure to remove the front panel before installing the unit.
Mounting angle adjustment
Adjust the mounting angle to less than 20
English
TA (Traffic Announcement)
PTY (Program Type)
o
.
3
4
English
MOUNTING EXAMPLE
Installation in the dashboard
Bend these claws,
if necessary
Note: Keep the release key in the safe place as you may need it in future to remove the unit
from the car.
Detaching and attaching the front panel
The front panel of this unit can be detached in order to prevent the unit from being stolen.
DETACHING THE FRONT P ANEL
Before detaching the front panel, be sure to press the PWR button (1) to OFF first.
Detach the panel by pressing the Panel Release button (14) and pulling it towards you as
illustrated.
Pull out the panel towards you in order to detach completely the panel from the main unit.
Detachable panel can be removed as direction 2.
Refer to below instruction.