Digital Effect Table - Phonic Sonic Station 16 Manual Del Usuario

53. Group 1 to 4 Controls
These four faders are the final level control for the Group 1
to 4 audio feeds, sent to the corresponding group outputs on
the rear of the sonic station 16 to feed external devices such
as effect processors, and, quite commonly, multi-track record-
ers. These faders can be fed a signal from the various input
channels, as well as the AUx Return 3, depending on your
selections. When pushed all the way up, these faders provide
10 dB of gain to the signal, and, when set all the way down,
effectively mute the signal.
The group Controls also feature individual left and right buttons
that allow users to send the various group signals to the Main
left and Right mix. This can be handy when wanting to com-
bine the signals from different input channels and control their
input levels simultaneously, then send them to the Main audio
mix. A good example of when this can be done is when multiple
inputs are used for drums; users can combine these inputs
together to be controlled much simpler by a single fader.

DIGITAl EFFECT TABlE

12
54. Main l/r Fader
This fader is the final level control for the Main Left and Right
audio feeds, sent to the Main l and R outputs. When pushed
all the way up, the Main l/R fader provides 10 dB of gain to the
signal, and when set all the way down, the signal is effectively
muted.
sonic station 16