brennenstuhl TRX 3500 Manual De Instrucciones página 9

PMR Walkie-Talkie TRX 3500
2.2. Displays
Channel number: a user-selected channel between 1 and 8
Battery level
Displays if automatic channel search has been activated
Displays if key lock has been activated
Displays when a signal is being transmitted
Displays when a signal is being received
Shows the current volume setting
3. OPERATION
3.1. Belt Clips
Removing the Belt Clip
•
Pull the belt clip locking mechanism away from the walkie-talkie (PMR).
•
Push the belt clip upwards while pulling the belt clip locking mechanism, as shown in Fig. 1.
Attaching the Belt Clip
•
Push the belt clip into the slot, as illustrated in Fig. 2.
•
You will hear a ‚click' when the belt clip snaps into place.
3.2. Inserting the Batteries
The PMR walkie-talkie requires 3 AAA alkaline batteries.
•
Unlock and remove the cover of the battery compartment.
•
Insert 3 AAA alkaline batteries. Make sure the positive and negative ends are facing the correct
direction, as shown in Fig. 3.
•
Replace the battery compartment cover. See Fig. 4.
Fig. 1
Note
•
Only use batteries of the same type and brand in your PMR walkie-talkies.
•
Do not mix old and new batteries.
•
Remove the batteries if you will not be using the devices for a long time.
BA_PMR_Walkie_Talkie_TRX_3500_0486178_617_.indd 9 BA_PMR_Walkie_Talkie_TRX_3500_0486178_617_.indd 9
Fig. 2 Fig. 3
Operating Instructions
Fig. 4
D
9
28.06.17 12:49 28.06.17 12:49