Descargar Imprimir esta página

Maintenance, Storage; Residual Risks - Stiga LT 500 Li 48 Manual De Instrucciones

Cortacésped/cortabordes con alimentación por batería portátil
Ocultar thumbs Ver también para LT 500 Li 48:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 164
• Never disengage, deactivate,
remove or tamper with
the safety systems/micro
switches installed.
• Do not use the power tool
if the switch does not turn it
on and off. Any power tool
that cannot be controlled
with the switch is dangerous
and must be repaired.
• Do not strain the machine
too much and do not use a
small machine for heavy-
duty work; if you use the right
machine, you will reduce the
risk of hazards and improve
the quality of your work.
2.4 MAINTENANCE,
STORAGE
Ensure regular maintenance
and correct storage to
maintain machine safety and
high performance levels.
Maintenance
• Never use the machine with
worn or damaged parts.
Faulty or worn-out parts
must always be replaced
and never repaired.
Be careful during adjustment
of the machine
entrapment of the fingers
between moving parts of
the cutting means and fixed
parts of the machine.
The noise and vibration
levels shown in these
instructions are the maximum
levels for use of the machine.
to prevent
The use of an unbalanced
cutting element, the excessive
speed of movement, or the
absence of maintenance have
a significant influence on noise
emissions and vibrations.
Consequently, it is necessary
to take preventive steps to
eliminate possible damage
due to high levels of noise and
stress from vibration; maintain
the machine well, wear ear
protection devices, and take
breaks while working.
Storage
• To reduce fire risks, do
not leave containers with
debris inside a room.

2.5 RESIDUAL RISKS

Despite compliance with all
safety prescriptions, some
further hazards may remain:
– danger of injuries to fingers
and hands if caught in the
rotation of the cutting line;
– danger of injuries to feet if
struck by the cutting line,
– stones and soil projections.
2.6 BATTERY / BATTERY
CHARGER
IMPORTANT The following
safety instructions are in addition
to the safety requirements
provided in the specific battery
and battery charger manual
delivered with this machine.
EN - 5

Publicidad

loading