Master/Slave Mode - Chauvet DJ SCORPION Storm RGBY Manual De Usario

Master/Slave Mode

The Master/Slave mode allows a single Scorpion Storm RGBY product (the "master") to control the actions
of one or more Scorpion Storm RGBY products (the "slaves") without the need of a DMX controller. The
master product will be set to operate in either standalone mode or with the IR remote, while the slave
products will be set to operate in slave mode. Once set and connected, the slave products will operate in
unison with the master product.
Configure the products as indicated below.
Slave products:
1. Press <MENU> repeatedly until SLV shows on the display.
2. Press <ENTER>.
3. Connect the DMX input of the first slave product to the DMX output of the master product.
4. Connect the DMX input of the subsequent slave products to the DMX output of the previous slave
product.
5. Finish setting and connecting all the slave products.
Master product:
1. Set the master product to operate in standalone mode or with the IR remote.
2. Make the master product the first product in the DMX daisy chain.
• Configure all the slave products before connecting the master to the daisy chain.
• Never connect a DMX controller to a DMX string configured for Master/Slave operation
because the controller may interfere with the signals from the master.
Page 14 of 52 Scorpion Storm RGBY User Manual Rev. 1
Operation