Operation; Manual Mode; Wireless Infrared Remote Control (Irc-6) - Chauvet DJ Min Laser RG Manual Del Usuario

4. O
PERATION
·
This product is not designed for continual use. Make sure there are regular breaks during
operation to maximize the life of your laser.
·
Always disconnect the MiN Laser RG from power when not in use.

Manual Mode

Wireless
Infrared
Remote
Control (IRC-6)
Page 12 of 44
Access the two different operating modes available in this product by using the
MODE button on the rear panel.
·
Press MODE to cycle through the modes.
Mode Description
1 Automatic
2 Sound-Active
3 Automatic / Sound-Active
Note: Product will Blackout
within 3 seconds.
The wireless remote (IR) will immediately override the MODE button. No
additional settings are required.
This product is compatible with the IRC-6 remote from Chauvet DJ.
The following IRC-6 buttons are used with the MiN Laser RG:
·
·
·
·
·
·
·
·
·
All other buttons on the remote have no function with this product.
·
The IRC-6 will not respond to any inputs when Black Out is activated.
If the remote does not respond when a button is pressed, try
pressing <BLACK OUT>. You may have inadvertently activated Black
Out.
†
‡
†
/ revert to Automatic
<BLACKOUT> - Turns Laser On/Off
<AUTO> - Selects Automatic mode
<SOUND> - Selects Sound-Active mode
<SPEED> - Automatic mode speed
<STROBE> - Strobing (0 – 25 Hz)
<+> / <-> - Increase or decrease
<R> - Manual Red (Add/Remove)
<G> - Manual Green (Add/Remove)
‡
if no sound is received
MiN Laser RG User Manual Rev. 2