ECOFOREST ecoGEO HP Manual De Instalador página 35

Direct installation
In simple heating / cooling systems, ecoGEO heat pumps can be installed directly into the distribution system, in systems with
underfloor heating, low temperature radiators and convectors.
AI20
T
DI1 EVU
DI2
DO1
AO1
DO12
Figure 1.7. Wiring scheme directly to the heating / cooling system (ecoGEO HP1 and HP3 models).
T AI20
DI1 EVU
DI2
DO1
AO1
DO12
Figure 1.8. Wiring scheme using a single buffer storage tank (ecoGeo HP1 models).
Installation using buffer storage tanks
If required by the application, the heat pump can also be connected to the heating / cooling system by buffer separator tanks. To
do so, it is equipped with two temperature probes that are used to control a buffer storage tank for heating and a buffer storage
tank for cooling. In installations where there is only one buffer storage tank for heating and cooling, both probes have to be
DI3
T AI12
DO4
DO3
AI11
T
DO2
DO17
AO2
DI3
AI12 DO5
T
DO4
DO3
T
AI11
T
DO2
DO17
AO2
34
Installer manual ecoGEO HP
T DI4
T AI19
DI5 DI7
T T
DI6 DI8
T T
AI13 T AI14
DO7 DO8
DO5 DO6 AO3 AO4
SG2 SG3
DG1
DO12
DI4
T AI19
DI5 DI7
T T
T DI6 T DI8
AI13 T
DO7 DO8
DO6 AO3 AO4
DG1 SG2
AI17
DO18
DO12
FBus2
DI9 DI11 DI13
T T T T
DI10 DI12 DI14
T T T T
T AI15 T AI16 T
DO9 DO10
AO5 AO6
SG4 SG5
FBus2
DI9 DI11 DI13
T T T T
T DI10 T T DI12 T DI14
AI14 T AI15 T AI16 T
DO9 DO10
AO5 AO6
SG3 SG4 SG5