Features - Ryobi RY40060 Manual Del Operador

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Recycle Symbol
V Volts
hrs Hours
Direct Current
n o
No Load Speed
.../min Per Minute
PRODUCT SPECIFICATIONS
Blade Length .............................................................. 18 in.
Cutting Capacity...............................................up to 5/8 in.
Cutting Speed ............................................ 3,000 cuts/min.
Weight ................................................................... 6.26 lbs.
Compatible With .............Ryobi 24 V and 40 V Power Head
KNOW YOUR PRODUCT
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BLADE COVER
The blade cover keeps the operator from coming in contact
with the sharp blades when the tool is not in use. It also helps
keep the blades from being nicked or damaged when the
tool is in storage.
THREE-POSITION PIVOTING HEAD
The hedge trimmer head can be adjusted with the pivot
button.
SYMBOLS
NAME

FEATURES

6 — English
EXPLANATION
This product uses lithium-ion (Li-ion) batteries. Local, state, or
federal laws may prohibit disposal of batteries in ordinary trash.
Consult your local waste authority for information regarding
available recycling and/or disposal options.
Voltage
Time
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
If purchased with 24 V power head:
Motor ............................................................ 24 Volts DC
If purchased with 40 V power head:
Motor ............................................................ 40 Volts DC
IF PURCHASED WITH A RYOBI 24 V OR 40 V POWER
HEAD, YOUR UNIT ALSO FEATURES:
ADJUSTABLE FRONT HANDLE
The front handle assembly can be adjusted for ease of
operation and to help prevent loss of control, and can be
positioned above or below the coupler.
HANDLE OVERMOLD
Handle overmold provides added user comfort.
LOCK-OUT
The lock-out prevents accidental starting.
VARIABLE SPEED SWITCH TRIGGER
This tool has a variable speed switch that delivers higher
speed with increased trigger pressure. Speed is controlled
by the amount of switch trigger depression.