Connecting To A Computer; Transferring Music To Your Player - Coby Smart MP201 Serie Manual De Instrucciones

Connecting to a Computer

To connect to a computer:
1. Make sure the player is turned off.
2. Connect the small end of the USB mini adapter
to the player's USB port. Plug the large end of the
adapter into your computer's USB port. It may
take your computer several minutes to recognize
and set up the device the first time it is connect-
ed depending on your hardware configuration.
Your player will be detected as a
—
"Removable Disk" when you open "My
Computer".
Page 7
When the player is connected to a comput-
er's powered USB port, it will draw power
over the USB connection.

Transferring Music to Your Player

Install the included Coby Media Manager (CMM)
software, then connect the player to a computer to
transfer (sync) music to the player.
If you choose not to use CMM, you can still perform
basic file management using your computer's
operating system commands. Please refer to the
documentation included with your operating sys-
tem for more information (e.g., Microsoft Windows
or Macintosh OS X).
Do not disconnect the player or otherwise
interrupt the file transfer process. Doing so
may corrupt your files and/or the player's
firmware.
Getting Started