Avoiding The Risk Of Serious Injuries; Moving Parts - Garant 925421 Manual De Uso

3.1.2. Avoiding the risk of serious injuries

Moving parts

Collision with the workbench
Lack of braking provision
Crush hazard for the hands and laceration hazard on re-
traction and movement within the drive unit.
» Wear safety gloves.
» Do not dismantle the drive unit.
» Never reach between the attachment plate and the
device body or into the inside of the drive unit.
» Maintenance of the drive unit may be performed only
by an electrician.
Crush hazard for the body in the event of collision with
the workbench or other objects.
» Make sure the paths for movement and transport are
clear.
» No persons must be present in the direction of travel
of the workbench.
Risk of injury due to being run over because of lack of
braking provision on the drive unit.
» Once the drive switch is released the workbench con-
tinues to roll forwards under its own momentum.
» Use the drive unit only for propulsion purposes, not
for braking.
» Before starting work, apply the parking brakes on the
castors.
» Do not use the workbench in areas where the floor
slopes upwards or downwards.
www.hoffmann-group.com
en
87