Entering And Leaving; Driving The Wheelchair - B+B Triplex Manual De Instrucciones

Ocultar thumbs Ver también para Triplex:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TRIPLEX
| Electric Wheelchair

4.4. Entering and leaving

Entering and leaving from the side
• Move the wheelchair as close as possible to the present or future
seat so they are side by side.
• If you wish to move from another wheelchair or room chair, lock it
by setting the parking brakes.
• Lock the Triplex to prevent it from moving accidentally by pressing
the On/Off button to switch off the control (all displays off).
• Remove the arm rest and side section.
• Fold the foot plates to the side or remove the leg rests.
• Now slide sideways onto the other seat.
• Make sure that you are sitting as far back in the seat as possible.
• Move the arm rest and leg rests to the original position.
Entering and leaving from the front
• First fold the foot plates up or remove the leg rests.
• Move the Triplex as close as possible to the present or future seat
front to front.
• If you wish to move from another wheelchair or room chair, lock it
by setting the parking brakes.
• Now slide onto the seat by turning your body around.
• Then move the arm rest and leg rests to the original position.
56
Electric Wheelchair |

4.5. Driving the wheelchair

Before moving check that the solenoid brake is
correctly locked.
Commissioning
• Sit in the seat of your B+B wheelchair and place your legs of the
footrests.
• Make sure that you are sitting as far back in the seat as possible.
• Make sure that there is no loose clothing such as scarves, shirts etc.
is hanging from the wheelchair and could be caught in the wheels.
• Make sure that you are comfortably and securely seated.
• Press the On/Off button to switch on the Triplex.
• All electrical driving functions are now available.
Driving functions
• Your dealer can adjust the values for speed, acceleration and
deceleration to your requirements subject to the legal regulations.
• For a start select a low mode and increase it while moving if
required.
• Use the joystick to start moving.
• The joystick is used simultaneously to increase the speed and to
change the direction of movement.
• When the joystick is in the central position, the wheelchair
is mechanically braked and locked to prevent it from moving
unexpectedly.
Bischoff & Bischoff GmbH | 01.06.2019
TRIPLEX
57

Publicidad

Tabla de contenido
loading

Tabla de contenido