Caution: Fire rise
If the refrigerating circuit is damaged:
-Avoid open flames or any source of combustion.
-Ensure that the room in which the appliance is installed is
well ventilated. It is dangerous to change the specification
of the appliance in any way whatsoever.
Damage to the power cable may cause a short circuit
and/or electric shock.
Electrical safety
- We decline any liability in respect of incidents caused by
poor electrical installation.
- Do not extend the power cable. Do not use an extension
cable, or adapter, or multi-way socket.
- Check that the wall socket is not damaged. A wall socket
in poor condition may cause the appliance to overheat and
explode.
- Check that the wall socket used for the appliance is
properly accessible.
- Never pull on the main power cable.
- Ensure that the appliance is always electrically earthed.
- If the wall socket is loose, do not connect the cable, as
there is a risk of electric shock or fire.
- Do not use the appliance if the interior lighting cover is
not installed.
- Disconnect the appliance before replacing the lighting
bulb.
- The appliance operates on a single phase 220~240 V / 50
Hz power supply.
The appliance must be connected to an earthed wall