Override Mode enables you to start the engine and drive your boat
in the event that you do not have your xFOB or your xFOB is out
of battery. You can engage Override Mode and start your engine
to drive without using the xFOB. The xHUB will flash a yellow light
every 5 seconds and sound a signal every 30 seconds when in
Override Mode. This is to remind you that you are not wirelessly
connected with your xFOB and thereby not safe in the event that
you would fall overboard.
We encourage you to always use the xFOB when driving your boat.
Make sure that the battery is not depleted in your xFOB
before driving. Check the battery lights on your xHUB while the
xFOB is connected to verify the battery status of your xFOB.
12
Override Mode
Engage Override Mode
Press and Hold the button of your xHUB for at
least 10 seconds.
First you will notice the blue light flashing
and the sound signal as if you were entering
Pairing Mode on your xHUB.