Fell Marine MOB+ Manual De Usuario página 6

Pairing
After proper installation, pair the xFOB and the xHUB as described
below. The xHUB remembers the 20 last paired xFOBs. Pairing
saves the ID of xFOBs in the memory of the xHUB. Pairing is only
done the first time you use an xFOB with an xHUB. Remember,
only one xFOB can be connected to an xHUB at the time acting as
a kill switch.
Press and hold the button on your xHUB.
Release the button when the xHUB starts
flashing blue and gives a sound signal indicating
Pairing Mode.
Immediately after releasing the button on the
xHUB, press and hold the button on your xFOB.
Keep the xFOB within 1 meter range from the
xHUB while pairing.
The xHUB will give a sound signal and the light
will flash green to indicate that the units were
paired successfully. You can now release the
button on your xFOB.
6