SEVERIN MW 9675 Instrucciones De Uso página 23

Ocultar thumbs Ver también para MW 9675:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 52
1. Press
, until the display shows the desired function (C-1, C-2 etc), or press
and then use the rotary control to select the desired programme.
2. Press
to confirm.
3. Use the rotary control to set the required cooking time.
4. Press
to start the cooking process.
Defrost programme according to time or weight (
This defrosting programme is useful for defrosting food by either setting the weight of the food to be
defrosted, or by directly setting the defrosting time. For delicate food we recommend defrosting on
the level 'Defrosting' (see table Power settings), to ensure that the food is defrosted with an even, low
temperature setting.
The indication dEF1 represents weight-based defrosting, and dEF2 time-based defrosting.
1. Press
once or twice. The display shows dEF1 or dEF2.
2. Use the rotary control to set the weight of the food to be defrosted (between 100g and 2000g) or
the desired defrosting time (between 00:05 and 95:00).
3. Press
to start the defrosting process.
Helpful notes:
During weight-based defrosting, 2 acoustic signals indicate that half the defrosting time has
elapsed. Turn the food over, taking out any that is already defrosted.
Should the food not be completely defrosted after the pre-set defrosting time has elapsed, it is
advisable to limit any further defrosting times to 1-minute periods until the food is fully
defrosted.
Food stored in plastic containers that are not suitable for use in microwave ovens should be left
for a while after being taken from the freezer. Wait until the food can be easily detached from the
plastic, before it is put into the oven inside a container suitable for use with microwave ovens.
Automatic cooking programmes
These programmes are helpful when cooking or heating up food without having to select any
particular settings, e.g. for power or cooking time.
1. Use the rotary control to select the desired menu. The display shows A-1 to A-10.
2. Press
to confirm the programme selection.
3. Use the rotary control to set the desired weight.
4. Press
to start the programme.
Display
Microwave
C-1
C-2
C-3
C-4
50 %
50 %
0
30 %
)
23
Grill
Hot-air convection
0
50 %
50 %
35 %
50 %
0
50 %
35 %
once

Publicidad

Tabla de contenido
loading

Tabla de contenido