Display Settings - JVC KD-X252 Manual De Instrucciones

DISPLAY SETTINGS

Zone identification for brightness setting
1 Press and hold .
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press to exit.
To return to the previous setting item, press
DISPLAY
DIMMER Dim the illumination.
OFF: Dimmer is turned off. Brightness changes to [DAY] setting.
ON: Dimmer is turned on. Brightness changes to [NIGHT] setting.
( [BRIGHTNESS])
DIMMER TIME: Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: 18:00 ; [OFF]: 6:00)
DIMMER AUTO: Dimmer turns on and off automatically when you turn off or
on the car headlights. *
1
BRIGHTNESS
TEXT SCROLL *
* 1
The illumination control wire connection is required. ( 16)
*
2
Some characters or symbols will not be shown correctly (or will be blanked).
.
Default: XX
Set the brightness for day and night separately.
1 DAY/NIGHT: Select day or night.
2 Select a zone. (See the illustration on the left column.)
3 LEVEL 00 to LEVEL 31: Set the brightness level.
2
SCROLL ONCE: Scrolls the display information once. ;
SCROLL AUTO: Repeats scrolling at 5-second intervals. ;
SCROLL OFF: Cancels.
11
ENGLISH