Meccanica Benassi Daytona 2WD Manual De Usuario página 33

PART
Before every use
FAN, ENGINE
RADIATOR FINS
Check condition and
ALL PULLEYS
working order
Check, lubrication of
MOWING HEIGHT
AIR FILTER
Check condition and
MOWING BLADES
Check condition and
MOWING DECK
On the AC 92-23 4x4 machine, change the oil after the first 50 operating hours, and then after every
1
200 operating hours.
For the replacement of all parts or for repairs, which require disassembly and which are not
described in this user's manual, contact your seller or an authorised service centre. Contact
your seller also for the following adjustments and maintenance:
• adjustment of the electromagnetic clutch
• adjustment of the brake
• adjustment of the engine
• replacement of V-Belts
• bleeding of the hydraulic circuit (for model AC 92-23 4x4)
• adjustment of the front drive axle (for model AC 92-23 4x4)
• other problems with the hydraulic circuit (for model AC 92-23 4x4)
• in the event of other difficulties
6.2 DAILY CHECKS AND MAINTENANCE
Before starting any maintenance or repair works, thoroughly reacquaint yourself with all
instructions, restrictions and recommendations in this user's manual.
Always remove the key from the ignition and disconnect the spark plug cables before
performing any cleaning, maintenance or repairs.
When working use suitable work clothing and work footwear. Use suitable gloves when
handling a mowing blade or for activities where there is a risk of cuts.
Avoid spilling fuel, oils or other harmful substances.
Do not perform any major repairs if you do not have the necessary tools and
a good knowledge about repairs of combustion engines!
Dispose of used oil, fuel or other hazardous substances and materials in accordance
environmental protection regulations in force.
INTERVAL
After every 50 hours
of operation or 1x
per year
--- ---
---
---
pins
Cleaning
---
fastening
---
fastening
33
Every 100 hours or
1x per year
Cleaning
---
---
Depending on nature
Replacement
of use - more often
---
---
NOTE
---
---
---
---
---