Product Specification; Intended Use - Bosch AQUATAK 10 Instrucciones De Servicio

Product Specification

Power washer
Part number
Rated power [W]
Supply Tempera-
ture max. [°C]
Supply rate min. [l/h]
Supply pressure
max. [bar] 1.5 – 6.0
Working pressure [bar] 90
Max. Operating
pressure [bar] 100
Flow rate [l/h]
Detergent [l]
Weight [kg]
Protection class
Serial Number See serial No 13 (rating plate) on machine.

Intended Use

The product is intended for cleaning areas and ob-
jects outside the house, tools, vehicles and boats.
Drainage pipes can be unclogged and rust or paint
coatings can be removed, if the appropriate acces-
sories such as cleaning agents approved by Bosch
are used. This product should not be used for pro-
fessional use.
Intended Use is related to operation within 0 °C and
40 °C ambient temperature.
Introduction
This manual gives instructions on the correct as-
sembly and safe use of your machine. It is important
that you read these instructions carefully.
When fully assembled the machine weighs approxi-
mately 6.0 kg. If necessary, obtain assistance to re-
move from packaging.
14 • F016 L70 370 • TMS • 06.09.05
AQUATAK 10 AQUATAK ECO
3 600 H76 ... 3 600 H76 ...
1 300 1 450
40 40
17 17
1.5 – 6.0
90
100
300 340
0.5 0.5
6.0 6.0
/ II
English - 2
AQUATAK 100
3 600 H76 ...
1 400
40
17
1.5 – 6.0
90
100
330
0.5
6.0
/ II
Delivered Items
Carefully remove the machine from its packaging
and check that you have all the following items:
– Power washer
– Power gun/high pressure hose
– Extension lance
(only AQUATAK ECO/100/100 PLUS)
– Fan Nozzle (only AQUATAK 10)
– Vario-jet-fan nozzle (lilac colour coded – only
AQUATAK ECO/100/100 PLUS)
– Roto nozzle
(red colour coded – AQUATAK 100 PLUS only)
– Detergent nozzle and bottle
– Inlet Connector
– Wash Brush (AQUATAK 100 PLUS only)
– Operating instructions
When parts are missing or damaged, please contact your
dealer.
AQUATAK 100 PLUS
3 600 H76 ...
1 500
40
17
1.5 – 6.0
90
100
350
0.5
6.0
/ II