Sun Visor - NZI Premium S Manual De Usuario

O W N E R S
the point and direction that marks the arrow
(Fig. 7) until the visor is completely free from
the helmet. Repeat the same procedure on
the other side of the helmet.
M A N U A L
Assembly:
Place the visor over the helmet simulating the
open position. Press the bolt with the notch of
the visor until the maximum displacement is
reached, as shown by the yellow arrow of Fig.
8. Keeping the pressure on the bolt, place the
anchoring part of the visor in the mechanism
on the helmet, as shown by the red arrow of
Fig. 8. Release the pressure on the bolt and
turn the visor slightly towards its closed posi-
tion. Repeat the procedure on the other side.
Open and close the visor several times to con-
firm that the visor is correctly mounted.

SUN VISOR

The use of the integrated sunvisor reduces
the hindrance caused by the sun while riding.
To move it up or down you only have to push
the control located on the left side of the hel-
met. (Fig. 9)
Sunvisor replacement.
Removal:
Put the sunvisor in its lower position and pull
it slightly down (Fig. 10); then pull out the right
side until the sunvisor comes out of the fixa-
GB
11