Retention System; Ventilation System - NZI Premium S Manual De Usuario

O W N E R S
Replacing the cheek pads.
Removal:
Pull out the cheek pad gently until it releases
from the buttons that support it in the interior
of the helmet (Fig. 14).
Mounting:
Fix the cheek pad on the buttons that support
it in the interior of the helmet.
Cheek pad cleaning.
Wash it by hand with neutral soap, don't wring
it out and avoid exposing it to direct sunlight
while letting it dry.

RETENTION SYSTEM

M A N U A L
Slide the toothed part into the buckle until
there is no more room in between the chin-
strap and your chin (Fig. 15).
Opening:
Pull the red strap on the buckle until the
toothed part of the quick release is completely
free (Fig. 16).

VENTILATION SYSTEM

This helmet has several air intakes and inner
ventilation channels that assure a good air ren-
ovation inside. In order to adjust the inner air
flow you can open and close the air intakes as
shown in Fig. 17, 18.
This helmet has a re-
tention system that
prevents the helmet fly-
ing of your head in case
of an accident.
Micrometric quick re-
lease.
Closing:
GB
13