NZI Premium S Manual De Usuario página 12

GB
ensures that it is properly allocated) and then
repeat the same operation on the other side.
Try the control button several times to ensure
that it works properly.
12
tion system (Fig. 11).
Do the same with the
other side.
Assembly:
Place the helmet on a
flat surface and make
sure that the mecha-
nism is in its lower po-
sition. Introduce the
left side of the sunvi-
sor in its slot (a click
O W N E R S
COMFORT LINER
Your helmet has detachable comfort liner. You
can easily take it out and clean it. Wash it by
hand with neutral soap, don't wring it out and
avoid exposing it to direct sunlight while letting
it dry.
Comfort liner replacement.
Removal:
It is recommended to remove the cheek pads
first. Pull the frontal part of the liner out of its
slot (Fig. 12); then pull the rear part out of its
slot (Fig. 13).
Assembly:
It is recommended to remove the cheek pads
first. Insert the frontal part of the comfort lin-
er into its slot; then insert the rear part of the
comfort padding into its slot. If necessary, use
a flat screwdriver (carefully).
Side cheek pads.
Your helmet has especially designed cheek
pads to optimize comfort and the positional
stability of the helmet while riding.
M A N U A L