Behringer X32 Guia De Inicio Rapido página 17

iPad Configuration
1. Download the Xi Control app for free from the Apple App Store.
2. Connect the X32 "Ethernet" jack to an available port on a wireless router (NOT the WAN / Internet port).
3. On your iPad, open the Wi-Fi settings and connect to the wireless router.
4. Launch Xi Control and take note of the IP address of your iPad. For this example, let's say it's 192.168.1.2
5. On the X32, press the SETUP button and page over to the "network" tab.
6. For IP address use the iPad's IP address noted in step 4 above EXCEPT change the last number.
For this example, try 192.168.1.58.
7. Next set the subnet mask to 255.255.255.0.
8. The gateway field can often be left blank, but fill it in with your router's IP address if you are having trouble.
9. On the iPad, enter the IP address for your X32 and tap connect.