Behringer X32 Guia De Inicio Rapido página 20

1. Press the SETUP button and page right to the "remote" tab.
2. Enable the Remote Selection button by pressing the first rotary encoder.
3. Choose Mackie Ctrl or HUI protocol and set the interface to Card MIDI to use the XUF Interface to transmit
MIDI over the same USB / Firewire cable as the audio.
4. Setup either a Mackie Control or HUI control surface in your DAW.
5. Press the REMOTE button on the left side of the X32 to control your DAW .
6. The 8 Output Faders now control the DAW, use the layer switches to toggle the mute buttons between the
following functions: Mute, Transport, Banking and Channel Selection. "Select" and "Solo" buttons will also work.
7. Buttons and Encoders in the ASSIGN section can be assigned to MIDI commands on their setup page.
DAW Control