Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Switching on
Press the ON key (the
maximum permissible
measuring range and the class
appears on the display).
Switching off
Press the OFF key, or automatic
cut-out 1.10 or 60 min. after the
last keystroke.
• The pressure values stated on the rating plate and mentioned in these operating
• The instrument is not to be used in an explosive environment !
• Wear eye protection for pressures > 1 bar!
• In the case of a temperature change the instrument requires at least 30 minutes to
• For precision measurements the instrument must be switched on for at least 1
Print and freeze display
Please read before using instrument!
instructions must not be exceeded or the pressure sensor can be destroyed.
adjust to the new ambient temperature.
minute (warm-up phase).
Connection for
pneumatic hoses
12
Description
2 cell, 16 digit matrix
liquid crystal display
Zero setting
Select operating mode
-Pressure measurement
-Min./Max.
- Leak rate
- Datalogging
START/STOP=
Data recording / printing
SET =
Select config. modes
SELECT =
Select config. data
Publicidad
Tabla de contenido
