Craftsman 151.98836 Manual Del Usuario página 12

60v máx ion de litiosopladora inalámbrica axial
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BATTERY PACK AND CHARGER
CHARGER LEDS
■ If the battery is not inserted into the
charger, a continuous red LED light indicates
that the plug is plugged into an outlet socket
and the battery charger is ready for operation.
■ Charging: a flashing green LED on the
charger indicates that the battery is charging
normally.
■ Charged: continuous green LED on the
charger indicates that the battery is ready for
use.
INDICATOR
SYMBOL
LIGHTS
Red,
Continuous
Green,
blinking
Green,
continuous
Red,
blinking
Charger Indicator Panel
Connected
Charging
To Power
STATUS
Connected to power
supply
Charging
Fully charged
Charging problem:
See Technical Issue
in CHARGER LEDS
Fully
Technical Issue
Charged
(see manual)
12 ― English
■ Technical Issue: a flashing red LED light on
the charger indicates that battery pack has a
charging problem or might be defective.
- One possible condition is the battery
temperature is not within the charging
temperature range of 35.6°F - 109.4°F or
the charging current is too high. As soon as
the permitted temperature and the charging
current ranges are reached, the battery
charger will automatically switch to charging.
- If the temperature range and charging
current are correct and flashing red LED
light continues, then remove and reinstall
the battery pack. If the LED status repeats a
second time, try to charge another identical
battery. If the battery charges normally,
dispose of the defective battery pack (see
Environmental Safe Battery Disposal section).
- If the flashing red light continues after
installing the second battery, the charger may
be defective. Replace with a new one.
■ After continuous or repeated charging
cycles without interruption, the charger
may warm up. This is normal and does not
indicate a technical defect of the battery
charger.

Publicidad

Tabla de contenido
loading

Tabla de contenido