Fm Radio Quick Start; Fm Radio Station Playing; Storing A Radio Station In A Preset; Playing A Preset Radio Station - Rotel RDG-1520 Manual De Instrucciones

English

FM RADIO Quick Start

Before listening to FM radio, make sure that the FM antenna have been
properly connected, and the correct FM format has been selected. Go
into 'Settings' menu and select FM tuner region.

FM Radio Station Playing

1. Select FM Button from the front panel. Or keep pressing BACK button
to return to top-level menu. Turn and press the knob to select FM menu.
The display will show as
Internet Radio
Media Player
< FM >
DAB
2. Turn the knob to change the frequency of radio station.
3. Use the scan buttons ] and [ on the remote unit to auto search for
FM stations.
4. Use track buttons on the remote } and { to manually search for
FM stations.

Storing a radio station in a preset

While a radio station is playing, hold down the memory button
press the number of preset assigned from numeric pad
will show, (also it can be done by the remote unit with buttons MEM,
numeric pad)
BBC RADIO
xxx kbit WMA
M Preset #
Store this FM radio station into the preset number. Up to 30 preset FM
radio stations may be stored.

Playing a preset radio station

When a radio station is playing, you can switch to other preset station
in one of the following two ways.
1. From the numeric pad
4
station.
2. Press QUEUE button to call out preset numbers and corresponding
q
station. Turn the knob to choose the desired station, then press the knob
to select it. The display will show as
01 preset radio 1
02 preset radio 2
> 03 preset radio 3
04 preset radio 4
Press QUEUE button again to exit the queue menu and back to playing
status.
87.50MHz FM
, the display
4
Assign to Preset
#
, press preset number of the desired

DAB RADIO Quick Start

Make sure that your local area can receive Digital Audio Broadcast (DAB)
broadcasting signal. Before using this feature, please go to the Settings
Quickstart section for DAB setting to select your DAB REGION and scan
available DAB stations.
After setting up, press the DAB button on the front of the panel, or select
DAB menu from the top-level menu to enter this feature. Select stations to
listen to by turning and pressing the knob.
DAB channels are categorized into ensembles, which are also known
as multiplexes. Each multiplex provides a number of stations and each
service contains a primary service that can contain secondary services.
DAB technology allow broadcasters to transmit additional data along
with the audio, which can include other audio channels, text and even
images and computer data in the future.

DAB Radio Station Playing

1. Select DAB Button from the front panel. Or keep pressing BACK button
to return to the top-level menu, turn and press the knob to select DAB
menu. The display will show as
Internet Radio
Media Player
5 , then FM
< DAB
The unit will scan for available DAB stations. Select the desired station
with the knob.

Storing a DAB station in a preset

While a DAB station is playing, hold down the memory button
press the number of preset assigned from numeric pad
will show. (also it can be done by the remote unit with buttons MEM,
numeric pad) Stores this DAB radio station into the preset number. Up to
30 preset DAB radio stations may be stored.
Radio Station Presets
FM,DAB and the Internet have 30 Pre-set Stations a total of 90 stations
can be logged in the unit. Many more stations can be stored on line at
your My Stuff account.
Note: For easier sorting, only the stations that are log in as Pre-sets will
be visible. Each station will be marked with an F for FM, D for DAB
and I for Internet Radio presets.
>
4
13
, then
5
, the display