Chore-Time Quadratherm Generation 2 Guia Del Usuario página 28

WARNING:
During normal operation, the surfaces of the unit become very hot. It is VERY
IMPORTANT that the power cords and gas supply hoses DO NOT TOUCH OR REST
ON ANY surface of the unit or to come within 12" of the heater.
The area directly above the unit becomes hot during normal operation of the
heater. DO NOT install electrical wiring, water lines or conduit above the heater.
DO NOT run gas supply hoses above the heater.
DO NOT ALLOW ANYONE WHO HAS NOT READ THESE INSTRUCTIONS TO
INSTALL, ASSEMBLE, LIGHT, ADJUST OR OPERATE THIS HEATER.
THIS HEATER IS TO BE INSTALLED BY CERTIFIED INSTALLERS ONLY.
ONLY PERSONS WHO CAN UNDERSTAND AND FOLLOW THESE
HEATER IS SHIPPED PRE-ASSEMBLED
TOOLS REQUIRED FOR INSTALLING HEATER:
¾" wrench for tightening gas connections
11/16" wrench
2 pipe wrenches
¼" nut driver
For additional manuals or more information, see our website at
QuadRadiant®
80,000 BTU High Pressure Heater
Maximum 5 PSI GAS
CAUTION
INSTRUCTIONS SHOULD USE OR SERVICE THIS HEATER.
120V
www.ctbinc.com
! WARNING!
Failure to read and understand
operator's manual and all
safety signs could result in
serious injury.
Manual must remain with
equipment.
4